How do you tile a bathroom floor?

Question

Do-it-yourselfer with no current experience in tiling will tile a small bathroom floor (12 x 12 tiles).

Answer 1

lay them on the floor as if already glued. [to get a view of any cuts or where to start.] some people start at the wall with out regards to the finished look, with cuts to one side . other people divided the area and start at a middle area with even cut sides at the wall. usually the door way view has a straight line and the cuts to the wall.

Answer 2

Buy you some stick down tile. They say to start in the middle of the floor, but I just always start in a square corner. On the back of the tile are arrows, make sure you lay them with the arrows going the same direction. A box cutter or utlitly knife works the best for cutting them if needed

Answer 3

First level the floor with floor-fill - make sure it is level. Then lay your tile out to figure out exactly how it will lay - begin gluing the tile down using spacers so each tile is exactly the same width apart - grout it and then seal it. I know this because I just recently did this to my bathroom floor.

Answer 4

You can do this...simply find the center of the room and start your first sticky tile there...then just follow along until it's done. You'll be so proud.

Answer 5

what kind of tile are you planning on using?

Answer 6

I searched the net and couldn't find anything step by step.. But try http://www.ehow.com/ I've got alot of usefull info from there