intergrated 10/100 means you have built into your motherboard a 10/100 network connection. You can use this connection to network your computers together, or connect to a router/dsl to connect to the internet.
2006-06-19 12:03:03
·
answer #1
·
answered by Jon 3
·
0⤊
0⤋
it means the ethernet card is built in usually to the mother board directly instaed of a add on card.
The formal designation for standardization of the Ethernet protocol is sometimes referred to as IEEE 802.3. The IEEE (Institute of Electrical and Electronics Engineers) proposed a working group in February 1980 - accounting for the designation [19]80 2[nd month] - to standardize network protocols. The third subcommittee worked on a flavor essentially identical to Ethernet, though there are insignificant variances. Consequently, generic use of the term "Ethernet" might refer to IEEE 802.3 or DIX Ethernet
2006-06-19 19:03:38
·
answer #2
·
answered by j_ardinger 5
·
0⤊
0⤋
It simply means you can connect the computer to a network or ethernet router or cable modem with a standard ethernet cable.
2006-06-19 19:05:13
·
answer #3
·
answered by Elle 6
·
0⤊
0⤋
when your computer has integrated 10/100 ethernet, it's just the ethernet port to plug ethernet cables into.
2006-06-19 19:03:26
·
answer #4
·
answered by Mike-Q 5
·
0⤊
0⤋
It's built on the motherboard don't have to buy a pci slot 10/100 card for your broadband or cable connection to the rj45 connection
2006-06-19 19:05:06
·
answer #5
·
answered by ssanchez2002 4
·
0⤊
0⤋
It will run at either 10 or 100, depends on what the network will allow.
2006-06-19 19:03:08
·
answer #6
·
answered by smgray99 7
·
0⤊
0⤋
Your network adapter can handle 100MB or 10MB (speed rating of data throughput) ethernet connections. Basically, unlike low speed-only adapters, it can use slow and fast(er) network speeds.
2006-06-19 19:03:21
·
answer #7
·
answered by Timothy W 5
·
0⤊
0⤋