2006-06-19 06:01:05 · 5 answers · asked by Dan 3 in Cars & Transportation ➔ Maintenance & Repairs
Same as before but without the rod in the plug hole. Attach a compression gage and turn engine slowly by hand until the pressure is maximum.
2006-06-19 06:10:48 · answer #1 · answered by yes_its_me 7 · 2⤊ 0⤋
the easiest way it to remove the number 1 spark plug . then insert a long rod in it and turn it over by hand annd watch the rod raise and lower and when it is at the top you will have tdc
2006-06-19 06:08:09 · answer #2 · answered by jim 2 · 0⤊ 0⤋
in case you get rid of all the spark plugs then the engine would be extremely easy to instruct and you will use a brilliant socket on the nut that holds the crank shaft pulley or maybe even by potential of pulling it by way of with the belts. A distant starter change is on the market at maximum vehicle areas shops for purely a pair of greenbacks and is a helpful investment.
2016-12-13 17:17:55 · answer #3 · answered by Anonymous · 0⤊ 0⤋
take out the no,1 plug then put your finger over the spark plug hole and have someone to bump the motor for you when you feel pressher pushing your finger away then turn the motor by hand until you get to the TDC on the harmonic balancer
2006-06-19 06:12:13 · answer #4 · answered by dl200558 5 · 0⤊ 0⤋
take distributer cap of and when piston is at top, check to see if the points are pointing at the number one spark plug position. if not it will be on the exaust stroke, if its right on its on compression.
2006-06-19 06:21:10 · answer #5 · answered by bcboi 2 · 0⤊ 0⤋