How do I 45 a piece of 1" outside corner so on a flat piece of plywood i am using for a top
2006-06-18 16:12:33 · 5 answers · asked by cl4ssie_thorn 1 in Home & Garden ➔ Do It Yourself (DIY)
use a tool called buzz you will find it next to the bed post in a white bag ok you might need a miter box and set it to 45 deg set the piece in the box just like it would go on the table..cut away happy buzzing
2006-06-18 16:16:16 · answer #1 · answered by bearczar 3 · 0⤊ 0⤋
Its a workbench - why 45 if you don't know how? Install the side piece to up to the front first and run the front piece to the end.
2006-06-18 17:18:36 · answer #2 · answered by Kanuk Komputers 3 · 0⤊ 0⤋
Guessing you mean half-round stock like for molding, I would suggest using a miter box. I built mine with 1x1/2 stock for a "fence" around the table to keep stuff from running off. I load 12 ga. for trap and 45 semi wad cutters for target. I have both a Pons-Warren size-o-matic and a Lyman "H" press on my table along with a case lathe and scale. My 45 powder drop is mounted on the front rail. I did use a miter box to cut the frames.
2006-06-18 16:25:43 · answer #3 · answered by Dusty 7 · 0⤊ 0⤋
you might want to rephrase the question. id love to help you out but i didnt understand a word of that.
2006-06-18 16:17:27 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Router (sp?)
2006-06-18 16:16:21 · answer #5 · answered by Jeppa 2 · 0⤊ 0⤋