Routher WGT 624 - I upgraded the routers firmware to the wrong version (i think) and now I cannot connect to it locally.
2006-06-18 11:08:29 · 5 answers · asked by Ally 1 in Computers & Internet ➔ Computer Networking
If you find "WGT624v3" on the bottom label, be careful because the firmware for this version is not compatible with WGT624v2 or WGT624v1.
I would just go back to Netgear's website and use their "Support" section for further troubleshooting.
2006-06-19 07:56:43 · answer #1 · answered by Sandy 4 · 0⤊ 0⤋
Yes, First remove the power. Click on Reset button and hold for 5 seconds and Keeping the reset button on hold connect the power and release. It should reset to original version (Factory Setting).
2006-06-18 11:16:05 · answer #2 · answered by moin_anjum 5 · 0⤊ 0⤋
Their should be a pin button on the back for the bottom of the router. Press it and turn the router off then back on.
2006-06-18 11:15:58 · answer #3 · answered by Mojo Jojo 3 · 0⤊ 0⤋
Be blue! Weirdly, azure hues have been shown undertake a favorable result on your will in all likelihood to exercising many times and avert undesirable ingredients. So, positioned on gleaming blue, consume from blue plates and watch the kilos drop off!
2016-12-08 22:25:51 · answer #4 · answered by kemmer 4 · 0⤊ 0⤋
For settings reset back to factory default, press the reset button for 30 sec. I dont know if it will work if firm ware was changed.
2006-06-18 11:14:33 · answer #5 · answered by Trixter 5 · 0⤊ 0⤋