Honda includes oil changes at 10,000 miles as a reason for the "Maint" light coming on. Now, I don't know who would let any vehicle go 10,000 miles between oil changes, but if the oil changes are not done at the dealer, the light remains on. Is there an "at home" way to reset the light trigger?
2006-06-17 01:34:32 · 8 answers · asked by Paper Tiger 1 in Cars & Transportation ➔ Car Makes ➔ Honda
you might think this is a joke but its not... to turn off the light hold trip odometer button in and turn on ignition for about 15 seconds... it should beep when reset
2006-06-17 01:42:46 · answer #1 · answered by John W 1 · 2⤊ 0⤋
Something is or was wrong or it would not be on. Sometimes it is only a glitch or a sensor has an invalid reading. Usually it means that one of the sensors is bad, You might not notice this at first but it may cause more things to go bad. You may be able to get the light off by pulling the fuse to the ecm or disconnecting the battery for a few minutes. If there was a problem this may make it harder to find.
2016-05-19 22:32:18 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I have a slightly earlier model of Honda, but if by chance they are the same "light" all you have to do is take a pen cap or something small and just push the indention underneath the "light" it will authomatically change back to green.
2006-06-17 01:40:32 · answer #3 · answered by mellyons01 1 · 0⤊ 0⤋
I just insert the key in the slot next to the light and push until it turns green again.
2006-06-18 14:24:33 · answer #4 · answered by Library Eyes 6 · 0⤊ 0⤋
I dont know how to do it at an '06 accord but if you have the book from the car it has to say it there.
2006-06-19 03:15:27 · answer #5 · answered by Bohdan K 3 · 0⤊ 0⤋
There is a black plasting thing on the spedometer and all you have to do is to put your key in there.
2006-06-17 06:57:42 · answer #6 · answered by Joel Q 2 · 0⤊ 0⤋
there may be a hole in the instrument cluster that you can put your ign. key in to turn it off!
2006-06-17 01:38:57 · answer #7 · answered by Orange Krunch 1 · 0⤊ 0⤋
look in your owners manual.. the procedure is in there, i beleve its in the guage cluster info center sect.
2006-06-17 14:20:35 · answer #8 · answered by Anonymous · 0⤊ 0⤋