how do i get milky color out of swimming pool?

Answer 1

Make sure the chemicals are in balance.
Circulate until the pool clears.
Make sure the filter is doing its job. Clean or replace the cartridge or change the sand. Adding a clarifier might also help. Has to be circulation, filtration, or chemicals.

Answer 2

Pool Water Milky

Answer 3

Too much chorine won't really do anything. You need to shock the pool. Shocking the pool will highly elevate the chlorine level in the pool and eliminate the cloudy water and only lasts a few hours unlike chlorine. You should get a test kit, but unless you have all the chemicals you need to adjust all things you can test, just get some test strips, that you put in the water and they turn color.

Answer 4

You should start by making sure your filter is working properly. It may need a cleaning or replacement of filter media depending on the type of filter it is.

I would also add unstabilized chlorine like chlorine shock (not the stabilized tablets). The stabilized chlorine doesn't work fast enough.

Your pool water may haev a high pH or alkalinity. This can be fixed by adding acid.

Your best bet is to get a water sample to your local pool dealer, and let them suggest a treatment based on your water chemistry as the culprit could be a physical one due to the filter or a chemical one due to the water chemistry

Answer 5

nicely it relies upon what chemicals have been further and whilst. on the initiating of the season you "marvel" the water purchase including a brilliant dose of chemicals. At this component i does no longer swim in it. After some days the water would be cloudy and look grimy although this is risk-free to swim. After a mutually as the chlorine and the clear out will clean the water till this is obvious. in case you do no longer shop up on the maintenance then the water will become murky and start to look grimy back. At this component it continues to be risk-free to swim in. as long because of the fact the water isn't rancid and packed with ineffective birds than this is super.

Answer 6

Buy a test kit for chlorine and the ph. Test the balance of the water and also the alkalinity. These all have to be in balance. Also, almost every pool shop will accept a sample of your pool water and test it for you. For free! Good luck!

Answer 7

take a sample of the pool water to a pool store. They will check it for you and tell you exactly what chemicals you need. Saves on guessing.

Answer 8

Check the pH and alkalinity of the pool. You'll probably have to add some chlorine.

Answer 9

Try switching to Baquacil. It's a hydrogen peroxide chemical that keeps your water sparkling clean. I used to have problems with chlorine products and switched to Baquicil. The sparkle on the water is amazing and the water is so clear.
http://www.baquacil.com/default.asp

Answer 10

Walmart has something called Clarifier. It only takes about 1 ounce per 10,000 gallons. It will help settle out the turbidity so you can vacuum the stuff off the bottom.