Problem: I had one RAM (256MB) on the motherboard, and it seems working and green LED is on. As I turn off the computer and took out the other RAM, which is also 256MB, from my closet that I have stored for long period of time, I install it correctly, but unsure if it is connected fully. So, I turn on the computer, and the green LED was completely off, only one stationary red is on. I rush to find out what happen to the Green LED, and it appears there's something's wrong. The conenctions seems connected, but no green LED on. Is anyone able to diagnose this problem and is anyone have solution for it?
2006-06-15 12:43:46 · 3 answers · asked by Zero Hunter 2 in Computers & Internet ➔ Hardware ➔ Desktops
There are a magnitude of problems that can be occurring here. Please read this all the way through before attempting any repairs.
First are the two sticks of memory identical? If not then one stick may be of an unsupported speed. Memory has a speed rating and if your processor or motherboard does not support that one stick of memory speed then it will not function.
The stick of memory could just plain be bad also.
I could not tell from your description if the computer actually shows a boot screen or BIOS screen with either of the pieces of memory?
Best way to diagnose this problem to me would be to note the location of all the components and where they plug in. Then remove all unnecessary cards, hard drives, and peripherals. All you want plugged in is the case, power supply, mobo, cpu, cpu fan, memory, and a video card (if the mobo doesnt have onboard video). You can then easily diagnose the memory without anything else being an issue.
Be sure to place the memory in memory slot 1. The contacts on the memory has one long side and one short side. Make sure you place it into the memory into slot 1 in the correct orientation. Press firmly and evenly on the memory until the holding tabs on the memory slot plug, squeeze into the "arc" in the memory. You can then firmly press the tabs into the memory to make sure it is seated correctly.
If it still does not work with either piece of memory then try another memory slot.
Be sure to unplug your computer before doing any repairs. Once the computer is unplugged, touch a metal part of the case with your hand prior to removing any part from your computer. Electronic components are extremely static sensitive and touching a metal part of your case equalizes the "static" between you and the PC making it safe to touch the components.
If the above fails give me more information by email on the problem you are having and I would be glad to help you.
Hope this helps! Good Luck to you!
2006-06-15 13:04:25 · answer #1 · answered by calcdffirefighter 3 · 0⤊ 0⤋
try the good ram on all the slots to make sure it is not a motherboard problem and try starting up.
If there wasn't a problem then put the malfunctioning stick by it self on all the slots and see if it works. if it does not then get a new one. if it does then you might have a compatibility issue
2006-06-15 12:56:47 · answer #2 · answered by P.P. 2 · 0⤊ 0⤋
BUY A NEW 1
2006-06-15 12:47:59 · answer #3 · answered by shanta3106 1 · 0⤊ 0⤋