2006-06-15 09:27:25 · 9 answers · asked by jaylamky 1 in Cars & Transportation ➔ Motorcycles
buy the cobra drag pipes! VERY LOUD
2006-06-15 17:53:10 · answer #1 · answered by deathdealer 5 · 0⤊ 1⤋
I think dumpweed has the best idea!
Seriously, I don't know about the other suggestions. Before you try it, talk to someone who knows bikes, like at a dealership. And do some more research before pulling out the ol' Black & Decker.
My suggestion - if you can't afford it now, start saving up for a good pipe later on.
2006-06-15 17:16:05 · answer #2 · answered by Anonymous · 0⤊ 0⤋
buy a cobra muffler. they are loud and that's what you want, plus they have all the info on if you need to rejet, no guessing.
Why do you want louder anyway?
soon the law is going to enforce the loudness codes and you could be looking at a ticket or loss of your ride.
2006-06-22 12:03:55 · answer #3 · answered by athorgarak 4 · 0⤊ 0⤋
Take out the baffles. Some have screws on the very bottom of the pipes, near the end. Take them out and pull out the baffles. Some are spot welded on the bottom of the baffles ( as you look into the pipe ). These have to be ground off before pulling the baffles out. Yes, you may have to jet the carbs.
2006-06-15 20:15:15 · answer #4 · answered by Devil's advocate 2 · 0⤊ 0⤋
Drill out the bafels. Sometimes though, you need to rejet after doing so.
2006-06-15 16:29:40 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Put a baseball card in the spokes
2006-06-15 16:30:50 · answer #6 · answered by Anonymous · 0⤊ 0⤋
cut the exhaust off about 12 inches behind the exhaust manifold, not exactly legal, but it will be loud trust me
2006-06-15 16:33:24 · answer #7 · answered by woundshurtless 4 · 0⤊ 0⤋
drill out the muffler. The more holes you have, the louder you get.
2006-06-15 16:32:18 · answer #8 · answered by Tom 2 · 0⤊ 0⤋
poke a hole in the muffler
2006-06-15 16:32:34 · answer #9 · answered by siltcoos 2 · 0⤊ 0⤋