how to remove chalking from PVC patio furniture?

Answer 1

Try Greased Lightning straight or Clorox Outdoor Bleach according to the formula mixture on the back of the bottle. It took both to get my chairs totally clean. It will happen again over time, unless you repaint them with the new Kylon Plastic paint or use auto wax to protect it.

Answer 2

Chalking Furniture

Answer 3

Metal tables can really take a beating with rust. If the rust is light, make a paste of lemon juice and table salt. The consistency should resemble applesauce. Apply the paste directly to the rust and allow it to set for five to 10 minutes. Scrub the paste and metal with sandpaper or an abrasive sponge. Major rust needs a chemical treatment. Always use gloves and goggles when applying a chemical to treat rust. Consult with a hardware store representative to see which one is best for you. Always follow the directions on the label and make sure to wash the metal thoroughly and that no children or pets can gain access to the metal until it is dry. Once the metal table has been treated, washed and dried, it could use a coat of paint. Start with a good primer made for metal. Use a double-roller to easily paint round, small strips of metal that are typical for a patio table. Your table will look like it was purchased that day.

Answer 4

The chalking of PVC patio furniture is the natural decomposition of the vinyl. The sun works on the surface of the plastic and it eventually dries out and becomes brittle. You can paint it, but you cannot clean it off. One way to reduce this is to store the furniture indoors in the off season. Try to keep it in the shade as much as possible.

Good luck with your patio furniture.