2006-06-15 01:21:05 · 6 answers · asked by malibu_annie 1 in Home & Garden ➔ Maintenance & Repairs
blow it up the wrong way around .... so the inside is on the outside.... then fill it up with water .... mark the hole with a pen so you can find it when you deflate it for repair
2006-06-15 05:07:24 · answer #1 · answered by insenergy 5 · 1⤊ 1⤋
There is a product you can buy in stores called "Snoop", but it can easily be made up at home. Basically, use a mixture of liquid soap and water. Add the soap last to keep the suds to a minimum. The Snoop bottle has a great nozzle for easy application, but if you use an empty dish detergent bottle, you should be able to get good enough control for this job.
Just blow up the pool and work your way around it, slowly pouring the mixture over the surface. Wherever you see bubbles, you have a leak. There may be more than one, so make sure you check the entire pool.
Good luck and keep cool!!
2006-06-15 03:20:22 · answer #2 · answered by Ladybug Lady 2 · 0⤊ 0⤋
A little liquid soap smeared around as it's being blown up will show the leak....the hole will bubble.
2006-06-15 01:25:08 · answer #3 · answered by missingora 7 · 0⤊ 0⤋
take a rag and a bucket of soapy water. go around the whole pool rubbing the soapy wet rag on it and you should find an area that bubbles. thats where the whole is. good luck!
2006-06-15 01:24:37 · answer #4 · answered by samantha 4 · 0⤊ 0⤋
put water in and look for little bubbles come out if it is one the outside feel aroung for a stream of air
2006-06-15 01:25:08 · answer #5 · answered by Anonymous · 0⤊ 0⤋
only way I know is to put water on the outside and look for air bubbles and yes it is a pain in the butt.
2006-06-15 01:24:34 · answer #6 · answered by ? 6 · 0⤊ 0⤋