English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-06-14 10:24:31 · 7 answers · asked by glen f 1 in Sports Baseball

7 answers

I recommend glove repair.com www.gloverepair.com, they are the best price I have seen. Turn time is good as well.

Your other option is to buy a kit and laces and do it your self. I think Rawlings makes a pretty good kit. Comes with a lacing tool and a couple strands of lace. It's not hard too do it just takes a little bit of time to do it. See below:

Steps:

1. Treat the new rawhide lacing with a leather softener or glove oil before you begin work. This will allow the leather to soften and make it easier to handle.

2. Inspect the lacing and memorize the lacing pattern.

3. Remove one section of the broken lacing (see A). If necessary, use a pair of scissors to cut it free. (Image 1)

4. Tie a simple overhand knot at one end of a long piece of the new rawhide lacing. Pull the knot as tight as possible.

5. Using a leather awl, ice pick or other pointy tool, push the lacing through the first hole in the stitching pattern. Pull the lacing through, up to the knot in its end.

6. Continue threading the lacing through the holes, following the lacing pattern of the original. Pull the lacing as tight as possible without deforming the glove. The lacing will stretch over time, so tightness is essential to a lasting repair.

7. Place another overhand knot in the lacing at the end of the section. Adjust the knot so that it is snug against the glove. Cut off any excess lacing.

8. Continue working on other sections as needed.


Overall Tips:

Don't remove all the old lacing on your glove at once, or you will probably forget the lacing pattern. Work section by section.

Rawhide lacing, leather softener and a leather awl can be purchased at hardware stores.

2006-06-14 11:26:49 · answer #1 · answered by hitting coach 2 · 0 1

If this glove continues to be offered in shops, purchase an identical glove to apply as a handbook. Then purchase the lace which they might desire to sell in a super wearing solid shop. this type once you rip out all the laces, you would be waiting to easily replica the hot glove, then return it once you're complete.

2016-12-08 20:48:11 · answer #2 · answered by Anonymous · 0 0

A shoe repair shop can.

2006-06-20 17:30:30 · answer #3 · answered by Anonymous · 0 0

get a new one

2006-06-14 12:50:07 · answer #4 · answered by Guess Who 2 · 0 0

This might be feasible

2016-08-08 00:04:41 · answer #5 · answered by ? 3 · 0 0

It depends..

2016-09-19 12:33:39 · answer #6 · answered by ? 4 · 0 0

Very carefully.......

2006-06-14 10:28:29 · answer #7 · answered by Dusty 7 · 0 0

fedest.com, questions and answers