2006-06-14 10:11:19 · 4 answers · asked by Edward 2 in Home & Garden ➔ Do It Yourself (DIY)
Go by an intertube patch kit. Its like a little piece of tape. Stick it on, and blow it up. Or you could just go buy a new one for about $20.00...
2006-06-14 10:14:46 · answer #1 · answered by strizzaight_trippin 2 · 0⤊ 0⤋
Get a patch kit, or use good old duct tape. Can't find the leak?? Blow it up a bit and put it in the bathtub (one section at a time obviously). Push on the matress and watch for the bubbles, that's where the air is escaping from.
2006-06-14 12:15:42 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I'd suggest a Inner tube patch kit, they come with the rubber patch that you cut to size and the adhesive. You can use liquid soap solution to find the hole, if you aren't sure where it is. Just rub it all over the mattress and look for bubbles. Clean the area with some smooth sandpaper, then the glue and patch, and you will be all set.
2006-06-15 10:33:11 · answer #3 · answered by johnb693 7 · 0⤊ 0⤋
If you found the hole already try using a product found at ace, or any hardware store called Shoe Goo, plumber Goo. sand paper spot lightly apply glue to spot with a small peice of duct tape.
works on inner tubes, and rubber balls at my elementary school.
2006-06-15 13:00:44 · answer #4 · answered by bill s 3 · 0⤊ 0⤋
Aerobed... You can normally buy them from QVC
2016-03-15 04:17:05 · answer #5 · answered by Anonymous · 0⤊ 0⤋