English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I tried to copy or save another document in my 3-1/2 floopy disk but it showed message that it is write protected, so please help me to remove its protection or control so that I can use it normally.

2006-06-14 03:08:45 · 8 answers · asked by Rodel 1 in Computers & Internet Security

8 answers

If you look at the disk you will see that there is a little switch on the disk that is switched to the locked position. It is about a quater of an inch big. Real hard to miss. Just look at the disk you will see it.

Glad to help.

2006-06-14 03:12:52 · answer #1 · answered by Daniel C 2 · 0 0

There should be a little hole on the upper right of the disk with a little plastic thing in it that you can slide up or down. Slide it up to cover the hole to make your floppy writeable.

2006-06-14 10:13:30 · answer #2 · answered by Dave R 6 · 0 0

There's a little hole in the bottom edges of the floppy. One of them has a slide over that has to be moved to cover the hole. That's how you either free or protect the content.

2006-06-14 10:12:55 · answer #3 · answered by sincityq 5 · 0 0

Move the small tab on the 3.5 inch floppy to the unlocked position, you will see a graphical representation of a unlocked lock.....

2006-06-14 10:12:40 · answer #4 · answered by Sam F 5 · 0 0

You've already gotten the right answer, so I'm just picking up 2 points. By the way, people still use floppys???

2006-06-21 09:11:46 · answer #5 · answered by TrueTrueWest_Indian 2 · 0 0

just check if the diskette is in good condition? also check the disk drive is not failed if you use other diskette.
look the lower right in the back of diskette if notch is in the unlock or not? If lock, you can't save or copy or edit the file in diskette?

2006-06-14 10:21:42 · answer #6 · answered by kenshin_h8 1 · 0 0

Sam is the man! Follow his post! If there isnt a slideable device simply cover it with tape.

2006-06-14 10:13:30 · answer #7 · answered by Anonymous · 0 0

If the tab is missing, you can use tape and paper (carefully) to cover the hole.

By the way, jump drives are cheap, and much neater to use.

2006-06-21 09:47:22 · answer #8 · answered by Quilt4Rose 4 · 0 0

fedest.com, questions and answers