English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

8 answers

i used a rock tumbler/ or a vibrating polisher like for gun brass it is a tub that is filled with tumbling media ( crused walnut shells) that you buy and it does a great job on all rusty sockets/wrenches and will not scrach them

2006-06-14 00:06:37 · answer #1 · answered by bearczar 3 · 0 0

I would first use a fine wire brush to remove the surface rust, then follow with steel wool . I have heard people use a product called navel jelly, but I have never tried it.

2006-06-14 07:00:57 · answer #2 · answered by WC 7 · 0 0

Depending on the degree, I've seen the oily sand method and Naval Jelly does a good job of dissolving rust enabling one to wash it off.

2006-06-14 07:03:25 · answer #3 · answered by brother 3 · 0 0

I've always used light motor oil and find sand paper growing up on a farm.

Seemed to do the trick.

*edit*
Seems the vote aroudn the office from the retired Military guys is overwhelming. They all say Naval Jelly. You just have to be carefull using it.

2006-06-14 07:00:44 · answer #4 · answered by Physics4Rich 3 · 0 0

A wire wheel on a grinder works well, followed by a wipe down of WD-40. don't put to much on as you need to remove any access.

2006-06-14 07:05:22 · answer #5 · answered by quiet times 4 · 0 0

WD-40

2006-06-14 07:02:15 · answer #6 · answered by Enlightenme! 2 · 0 0

Dip them overnight in kerosene.

2006-06-14 07:03:53 · answer #7 · answered by Geepee 5 · 0 0

navel jelly

2006-06-14 07:04:55 · answer #8 · answered by Anonymous · 0 0

fedest.com, questions and answers