2006-06-13 07:10:00 · 9 answers · asked by Karen B 1 in Cars & Transportation ➔ Car Makes ➔ Mercedes-Benz
if your ASR light is on, then either you are experiencing wheelspin (even a small amount will cause it to flash), or you might have pressed the ASR button to turn it off (it will be on constantly).
2006-06-13 13:37:36 · answer #1 · answered by sriparimi 1 · 0⤊ 0⤋
Mercedes Warning Lights Meaning
2016-11-04 21:39:32 · answer #2 · answered by silvi 4 · 0⤊ 0⤋
The ASR (button located on the console above the driver window controls e.g. 98E430) is the
Automatic Slip Regulator, aka-traction control. Push up to turn off, down to turn on (automatically ON
at start up); the ASR light is a yellow triangle located in the center of the speedometer cluster and
will light when the ASR is turned off or blinking if the wheels lose traction.
2016-02-18 11:19:58 · answer #3 · answered by Indiana 1 · 0⤊ 0⤋
ASR is a traction control device that keeps the car from spinning its wheels It use the brakes so you should take the car to a shop that can plug in a diagnostic tool to find the problem. Could be a bad wheel speed sensor.
2006-06-13 16:12:08 · answer #4 · answered by uthockey32 6 · 0⤊ 0⤋
The ASR button light should be on, if the light is on, on your gauge cluster then you must be hitting a slipery spot. ASR is a type of traction control.
2006-06-13 07:37:02 · answer #5 · answered by iggy315 2 · 0⤊ 0⤋
I bet, since you can afford a Mercedes, you can afford to simply take it to a garage. That would be the best way to fix it!
2006-06-13 07:16:15 · answer #6 · answered by xx_x420x_xx 1 · 0⤊ 10⤋
In my case, you would lose that bet. You should never bet on assumptions.
2015-03-17 06:03:58 · answer #7 · answered by Lara 1 · 3⤊ 0⤋
I would like to know this too
2016-09-20 12:28:08 · answer #8 · answered by Anonymous · 0⤊ 0⤋
that is a good question and I hope you will get valuable answers
2016-08-14 01:20:39 · answer #9 · answered by Anonymous · 0⤊ 0⤋