English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I understand that it is a pain to get to the oil filter, apparently located under the exhaust manifold. Is this a job that requires crawling under the car or can the filter be reached from the hood area?

Also, are there any issues getting to the oil drain plug on this car?

Are there any components that need to be removed like a shroud?

2006-06-11 14:16:23 · 3 answers · asked by Nick D 2 in Cars & Transportation Maintenance & Repairs

3 answers

Yes there is a plastic stone guard that has to come off. Access to the oil filter is underneath and it is quite easy once the stone guard is removed. Use a proper filter wrench to remove it but hand tighten ONLY firmly with a little oil smeared on the rubber seal.The sump plug (19 mm) is easy, use a new washer and don't overtighten. Fill the engine slowly or it will spit back through the filler, avoid over filling. Jules, automotive lecturer, Australia.

2006-06-12 18:34:29 · answer #1 · answered by Jules G 6 · 1 0

being a 2007 you should have a warrienty on that car.when its time for a tune up you should take it to the place you got it.

2006-06-11 21:20:48 · answer #2 · answered by Anonymous · 0 0

Stallion, that is one stupid answer.

Nick, I hope someone with half a brain can provide you with the answer; I'm interested in the answer myself. Let's keep our fingers crossed...

2006-06-11 21:28:10 · answer #3 · answered by Sizarro 1 · 0 0

fedest.com, questions and answers