English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I made a 6 foot pond 4 brick high,I put concert the in side and drylocked it. but i still have a couple of leaks. what can I do?

2006-06-08 17:28:27 · 9 answers · asked by lorraine_43777us 2 in Home & Garden Maintenance & Repairs

9 answers

You're going to have to drain the pond. Then you'll have to have to examen it for cracks, etc. where the leak might be. You should then either fill the cracks and holes with cement or have someone do it for you. Lastly, you should put a sealant over the entire surface siince bricks absorb water and detriorate rapidly when kept wet. The problem you most likely have is that the bricks weren't sealed and they have begun to break down due to continued exposure to the water.

2006-06-08 17:35:00 · answer #1 · answered by quietwalker 5 · 1 1

Got to Plug the whole

2006-06-08 17:32:05 · answer #2 · answered by spenderalla34 2 · 0 0

the best solution would be to line it with a flexable liner. I don't think you"ll ever get it to seal otherwise.

2006-06-09 14:14:55 · answer #3 · answered by applpro 4 · 0 0

I don't know if this will work or not, try concret paint roll it on when your pond is dry. Try that!

2006-06-09 14:50:17 · answer #4 · answered by poorboychristian 3 · 0 0

you might need to use a good liner, or maybe use a better sealant

2006-06-08 17:31:07 · answer #5 · answered by dzr0001 5 · 0 0

hydrolic cement
(get it at home depot lowes just about everywhere)

2006-06-09 11:12:41 · answer #6 · answered by hillbilly271 3 · 0 0

tricky subject. look on google and yahoo. that will might help!

2015-03-28 18:12:48 · answer #7 · answered by gilbert 2 · 0 0

tricky point. check out in google or bing. it will help!

2014-11-26 15:40:13 · answer #8 · answered by Anonymous · 0 0

put a piece of gum on it.

2006-06-08 17:31:48 · answer #9 · answered by murdagr 2 · 0 0

fedest.com, questions and answers