English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Also I got a new speaker system 5.1 and I need a new sound card.. about how much $ do I need to spend for one.. i basically just want it for listening to music.. but loud and clear

2006-06-08 11:33:19 · 7 answers · asked by christada619 1 in Computers & Internet Hardware Add-ons

7 answers

EASY,

1 turn the computer off.

2. open the case.

3, touch the bare metal to discharge any static that you may have.

4. unplug the powercord from the back of the computer.

5. take the screw out of your old sound card and remove card. save screw.

6. Put New card into slot and replace screw.

7. Replace cover, and plug in.

8. load cd that came with your sound card, and install drivers.

Price for a 5.1 sound card is around 15.00 to 25.00 depending on Brand and place you purchase. I would not pay more than 50.00 in a retail store.

2006-06-08 12:18:44 · answer #1 · answered by rob_h_hodges 2 · 1 1

Make sure the system unit is turnd off then slot in the sound card making sure the card sit in the slot very well be it pci or agp.Boot the system and wait untill there is a message that reads new hardware found,but sometimes when using win xp it is easy to get the drivers for some hardwares,but incase it detect and cant provide the drivers for it the put in the drivers cd into the dc-rom and click on next on the found new hardware dilogue box,next select the location of the drivers thats is from the dc-rom and the install,after which you need to reboot the system for proper function of the sound card.thank you.

2006-06-13 01:52:11 · answer #2 · answered by Anonymous · 0 0

its really simple all you do is unplug all the cords from the back of your computer,unscrew the side off of your computer,(it might not need to be unscerwed some computers just have a couple clips to do this.)next you take out the old sound card by unscrewing it or un cliping it,if it doesnt have one then just put the new one in a slot that it will fit in.if it had one and you removed it then put the sound card in that slot.but be carefull make sure the sound card is compatable with your computer.(tell the sales associate what type of system you have and they should point you to a compatable sound card),an if it doesnt fit in the slot then try another slot,if it still wont fit then dont try a force it in the slot.just take that one back and try a get a different kind that will fit that slot.hope this helps and good luck:)

2006-06-08 11:43:25 · answer #3 · answered by Anonymous · 0 0

I don't know much about this stuff myself, but installing something is never too hard. It should guide you on what to do. Ask a sales associate at the store when purchasing the sound card for info and tips/recommendation. I'm sure they be happy to help.

2006-06-08 11:37:24 · answer #4 · answered by send_felix_mail 3 · 0 0

It's not too hard, follow Bubba Tech's instructions, but you may have a integrated sound card on your mobo, you will have to disable it and then install your new PCI card and software drivers.

2006-06-08 16:36:04 · answer #5 · answered by mittalman53 5 · 0 0

These instructions will work for the majority of Pentium or newer PCs running Windows 95/98. If your computer currently has a sound chip or if your sound card requires a change in jumpers or IRQs, installation will be much more complicated.


Steps:
1. Shut down the computer.

2. Leave the computer plugged into the surge suppressor.

3. Disconnect all peripherals from the computer.

4. Remove the cover of the chassis.

5. Ground yourself to the computer. If you have a grounding strap, put it on and follow its directions. Otherwise, ground yourself by touching a metal part of the chassis.

6. Remove the back panel, if necessary.

7. Remove the existing sound card, if any. Put the new sound card into that slot if it will fit physically. Skip to Step 11.

8. If the computer doesn't already have a sound card, find an open PCI slot. PCI slots are smaller than ISA slots.

9. Knock out or unscrew the metal plate on the card's slot holder on the back panel.

10. Insert the sound card gently but firmly into the slot. Rock it into position if necessary, but don't force it. Don't touch any connectors on the card.

11. Connect cables from the CD-ROM drive to the sound card.

12. Replace the back panel and any removed screws. Screw sound card into slot holder if it has a screw hole.

13. Reconnect monitor, keyboard, and mouse. Connect speakers to the sound card's ports.

14. Turn on the speakers and restart the computer.

15. If Windows detects the sound card upon startup, follow instructions to install the card's driver and additional software. If Windows doesn't detect sound card, manually complete the installation using the Add New Hardware control panel.

16. Play music CD to test sound card.

17. Shut down computer.

18. Replace cover of computer. Reboot computer.


Tips:
If possible, do installation in an uncarpeted area to avoid static.

If possible, use the slot with the most open space around it.


Warnings:
Installing software that comes with your sound card will change settings in the Windows Registry.

Be careful not to touch any connectors (chips). Touch as little as possible on the sound card or inside your machine.

If your computer is under a manufacturer's warranty, modifying the product usually ends that warranty.

If you do not understand these instructions or you lack good manual dexterity, have a qualified technician install the sound card for you.

Tips from eHow Users:
Installing software
Sometimes the sound-card comes with a CD with software from the manufacturer. Refer to the manual for installing it in Windows first, sometimes it is necessary to skip the automatic Windows Hardware Wizard.






You've purchased a new sound card and brought it home. Now there's the little matter of installing it. Once you're familiar with the steps, installing a card quickly becomes old hat. Plenty of gamers mark the occasion by picking up the phone while they're in the middle of installing a card and announcing to their friends that their newly hot-rodded machine will soon make them the king of the realm. But digging around inside a computer can be a bit boggling the first time, so we'll outline the general steps to get you there.

Note As with any computer maintenance, check the documentation that came with your computer, and preview the sound card instructions. Take into account any special considerations they mention for changing sound cards. If you read this article and the task still seems confusing, consider getting someone to help you in person. Some computers have sound cards built in to the motherboard. If this is the case with your computer, definitely consider getting some assistance.

You'll need:

1.
Screwdriver to match the screw heads on the back of your PC. Usually 1/8" Phillips will do the job.

2.
Manuals from your old sound card (if you have one installed) as well as your new one.

3.
Drivers that came with the new sound card. It's a good idea to have them handy before you start the installation, though they'll typically go in after you've installed the sound card (some manufacturers differ on this; check your instructions). Usually drivers come on a CD-ROM. Otherwise you can download them from the manufacturer's Web site, or File Planet.


Install the New Sound Card

1.
Unplug the PC. Don't just turn off the power strip—physically unplug the PC from the wall.

2.
Locate the old sound card. Turn the PC around and note where the speakers plug in. When you open the case, you can locate the sound card by lining it up with the jacks where you see the speakers plug into the back of the computer (those jacks are part of the sound card).



This is the "outside" of your sound card (where the speakers plug in).


3.
Remove the case. Some cases have clasps clipped to slots in the frame of the computer, whereas some cases are screwed to the metal frame itself. Sometimes clasps cover screw heads, so open the clasps to view the screw heads and make sure you have the right screwdriver.



The case is fastened at the edges with either screws, clasps, or both.


Note When you look at the front of most PCs, the case wall on the left is the one you want to remove. When you open the case you'll usually either see a solid metal wall or an open bay full of wires and circuit boards—the bay's where you'll find access to the sound card. Also, with some computers, the whole case comes off in one piece.

4.
Locate and identify the old sound card. Unplug the speakers and anything else plugged in to the sound card from the outside. You may want to line up what you see inside the computer with the speaker jacks on the outside—sometimes other cards are much closer to the sound card than what you see in the picture.



A sound card in place.


Note Computer design varies; you may need to move other components out of the way before you can get to the sound card.

Note Once the case is open, keep a hand on the power supply to ground yourself and protect the new card from static. When the computer is unplugged, this is safe. The power supply is the metal casing surrounding the jack where the power cord plugs in, usually near the top of the PC.

5.
Static electricity can seriously damage the sound card and the motherboard. It may be tricky to keep a hand on the power supply during the entire procedure. Trust us, it's necessary. Place a hand on it first (and keep it there) whenever you're touching the new card or the inside of the computer.

6.
For these photos, we skipped this step, so it would be easier to see what's happening in the photos. We photographed a PC that isn't being used anymore.

7.
Disconnect the CD-ROM sound cable from the jack on the old sound card itself (there's a chance your computer may not have this cable—if it's not there, don't panic. Just skip this step.) Make sure to release any clip holding the cable in the jack. Don't yank the cable out if it doesn't easily disconnect. check for something fixing it in place.



Disconnect the CD-ROM sound cable.


Note Not all cables look alike. Yours may not resemble what you see in the photo. Keep an eye on the cable when you remove it—it won't go very far, but it may resemble several other cables and picking it out again could be confusing. You may want to put a piece of colored tape on it temporarily.

8.
Unscrew the sound card from the frame of the computer.



Unscrewing the sound card from the frame.


9.
Remove the card from the motherboard by lifting steadily without rocking or twisting. The card bay may have a clip on one side holding the card in place. Release the clip instead of jerking the card free.



Lift the sound card from its bay on the motherboard.


Note The card may need one or two gentle up-and-down nudges to come loose. Even if you're just throwing away the old card, use caution when removing it as you may damage the motherboard. If it seems stuck, it's better to spend a few extra minutes tugging gently than to rip the card out in a split second and damage the motherboard in the process.

10.
Locate the slot where the new card will seat. If you're upgrading from an ISA card to a PCI card, you'll need to put the new card in the PCI bay. Check your documentation if you have trouble identifying the PCI bay.



The new card goes in exactly the same place.


11.
Place the sound card directly into the motherboard bay. Make sure the card is right side up—usually the screw hole where the card joins the frame is the easiest visual cue to follow.



Seat the sound card directly into the bay on the motherboard.


Note It's easy to mis-align the sound card. Every pin on the mounting side should line up in perfect symmetry to the bay on the motherboard. It's possible—even for experienced users—to seat the sound card out of alignment, and to spend hours (or days) trying to figure out what's wrong.

12.
Attach the cable that runs from the CD-ROM drive to the card. Note where the old cable attaches to the CD-ROM, unplug it, and attach the new cable. If you don't have a new cable and the old one fits your card, attach it. Most new sound cards use a special cable to connect to the CD-ROM drive. The manufacturer should include the special cable along with the card. If no cable is included and the card won't accommodate the old cable, contact the card manufacturer for a cable.



Plug in the CD-ROM sound cable.


13.
Screw the sound card to the frame. Sound card screws are usually the same size, but if your new card came with its own, use them just to be safe. Don't warp anything while tightening the screw. It's better to have the screw in barely tighter than you can drive it with your fingers than to bend the frame or the card.



Screw the new card to the frame.


14.
Plug in your speakers and any other peripherals, re-attach the case, reconnect the power, and you're ready to boot the computer and install the drivers.


Installing drivers
With a large majority of computers, Windows XP will recognize a new sound card, find the drivers that run it, and have you ready to play without your even having to think about it. But you may see a New Hardware Wizard asking you to install new drivers.



The New Hardware Wizard detects new hardware and helps you prepare it for use.


If your sound card came with a CD-ROM, insert it and let Windows XP install the new driver from it. If you downloaded the driver from the Web, Windows XP should detect it on your computer, but you may need to select Install from a list or specific location on the Found New Hardware Wizard and browse to the file. Follow the instructions on the Wizard to finish installing the driver.

2006-06-08 17:56:05 · answer #6 · answered by Anonymous · 0 0

walmart $150.00 make sure to get one for 5.1
simple if you can follow instructions

2006-06-08 11:38:00 · answer #7 · answered by john d 2 · 0 0

fedest.com, questions and answers