How can I remove Lime Scale buildup in my water heater?

Question

I live in a hardwater area 52 was the last reading and the lime scale buildup in my Gas water heater is unbearable! I also spend loads on cleaning products for other electrical appliances that work with water

Answer 1

You need to flush out the water heater with a garden hose.
It is probably filled with little rocks.
The inlet is probably at the bottom of the tank.

Answer 2

Replace your water heater's anode rod. You'll need to turn off and empty it first. The web reference below has some additional info. And you'll often need a very big wrench to gain the leverage needed to free the old one.

Caution: the new rod will be about 4 feet long. Depending on the location of your tank, you may need to completely disconnect the tank in order to tip it on its side to change the rod. If you have to do this, depending on the age and condition of your tank, consider replacing the whole tank. When draining, inspect to see the amount of sediment particles that come out.

Answer 3

All the answers I have read tell you the answer if we are understanding you correctly. Do you mean water is coming from the threads from the T&P valve male threads or the Male threads of the adapter you screwed into the T&P.? Do you know what made the T&P leak to start with? Was it leaking from the theads then. Is this a Marathone water heater? ( they have rubber seals. Was the T&P blowing off? Check your water pressure. Is the temp to high. Please let me know how it turns out. Thanks