2006-06-06 06:06:27 · 4 answers · asked by scoobydoo 1 in Computers & Internet ➔ Computer Networking
check your ip config
(start ->run-> type cmd and then in the box type ipconfig) confirm that you have an ip address, a subnet, and a gateway. The gateway and subnet should be the same for the devices tih differing IP addresses. If that checks out, you may want to look and see if the router or switch is blocking icmp requests. TX
2006-06-06 07:26:27 · answer #1 · answered by txengineer762 4 · 0⤊ 0⤋
Check the obvious things first:
- Does your IP address belongs to the same network segment?
- Does your network mask matches?
- Do the other computers on your network prevent answers to pings (for example by using xp sp2 or some sort of personal firewall)?
- Does your computer allows icmp requests (ping) to go out?
- Do the other computers successfully ping each other?
- Do they ping your computer?
- Do other services work between your computer and the others (for example file share)?
- Are you using a switch? Do the speed and duplex settings match on both the switch and your network adapter?
2006-06-06 15:54:01 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Are they set up to be pinged or ssh? Also depends on the router is it set to allow this for the individual IPs?
2006-06-06 14:28:14 · answer #3 · answered by fed-up 3 · 0⤊ 0⤋
probably a component missing or misplaced. re-install it. good luck
2006-06-06 13:09:55 · answer #4 · answered by den 3 · 0⤊ 0⤋