有請英文高強的大大~可以幫我翻譯這個步驟的意思嗎??

Question

以下是我要破解某知名程式的破解方法~
可是我的英文實在太破了~
有請大大幫我翻譯一下囉~please

原文:
How To Crack Maya 8.0

1. Copy the folder FLEXLM to c:\
2. Run FlexLM License Utilities Located on your start menu under Autodesk\Common Utilities
3. Select the system settings tab & hi-lite your Ethernet Address ID and Copy
4. Open C:\FLEXLM folder and edit aw.dat with notepad.
5. Replace your_host with your ethernet address ID you copied in step 3 (just paste it in) Now save & close note pad
6. Select run from the start menu & type cmd
7. Type cd\ and then press enter
8. Type cd flexlm and press enter
9. Type awkeygen aw.dat and press enter
10. type exit then press return
11. Now run Maya 8.0

Answer 1

How To Crack Maya 8.0
如何破解Maya 8.0

1. Copy the folder FLEXLM to c:\
首先將FLEXLM資料夾複製到c槽底下
2. Run FlexLM License Utilities Located on your start menu under Autodesk\Common Utilities
開始執行FlexLM應用程式，其位置在開機選單Autodesk\Common Utilities路徑之下
3. Select the system settings tab & hi-lite your Ethernet Address ID and Copy
選取系統設定表單及標識你的乙太網路卡的ID位址並且複製
4. Open C:\FLEXLM folder and edit aw.dat with notepad.
開啟C:\FLEXLM資料夾以及以筆記簿編輯aw.dat檔案
5. Replace your_host with your ethernet address ID you copied in step 3 (just paste it in) Now save & close note pad
以複製第3項乙太網路卡ID位址取代你的主機並且關掉筆記簿
6. Select run from the start menu & type cmd
從開機選單執行並鍵入指令
7. Type cd\ and then press enter
鍵入cd\指令後按enter
8. Type cd flexlm and press enter
鍵入cd flexlm後按enter
9. Type awkeygen aw.dat and press enter
鍵入awkeygen aw.dat 後按enter

10. type exit then press return
鍵入exit離開，再按return退出
11. Now run Maya 8.0
執行Maya 8.0 *****

Answer 2

原文:
How To Crack Maya 8.0

1. Copy the folder FLEXLM to c:\ 拷貝FLEXLM資料夾到c:\
2. Run FlexLM License Utilities Located on your start menu under Autodesk\Common Utilities執行FlexLM有效地許可位置在你的開始之名單下路徑為Autodesk\Common Utilities共用的且為有效用的
3. Select the system settings tab & hi-lite your Ethernet Address ID and Copy選擇所要安裝之系統的標籤或拉環並且輕輕移除你的乙太網路卡的ID位址並且複製
4. Open C:\FLEXLM folder and edit aw.dat with notepad.開啟路徑C:\FLEXLM資料夾以及編輯aw.dat與筆電同時使用
5. Replace your_host with your ethernet address ID you copied in step 3 (just paste it in) Now save & close note pad切換你的主機與你乙太網路卡重覆作第3項的位址並且複製(將它們連結上去).因此儲存他並且關掉筆電.
6. Select run from the start menu & type cmd從開始.程式集並選擇.型態指令加以運轉
7. Type cd\ and then press ente型態指令確定後按鍵入
8. Type cd flexlm and press enter型態指令為flexlm確定後按鍵入
9. Type awkeygen aw.dat and press enter型號為awkeygen aw.dat 確定後按鍵入(批字檔)
10. type exit then press return跳出型態然後按回歸.回程
11. Now run Maya 8.0 現在正在執行Maya 8.0 版