English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
所有分類

我用梗 hp f380, 咁我想print張 4R 相, 不過張相 size 好明顯唔係 10x15cm 的比例,
所以我預覽的時候往往有兩條白邊在左右兩旁....點先可以完全無邊而又不會拉闊張相?

2007-03-15 22:57:13 · 1 個解答 · 發問者 ? 1 in 電腦與網際網路 硬體 其他:硬體

1 個解答

點先可以完全無邊 ?
You need to make sure the PAGE SETUP is done correctly in your Printing software... and "Retain Picture Scale" , the HP printer software should take care of you ...
I use a old piece of software to print photo, called Paint shop Pro 4.12
http://www.oldversion.com/download.php?idlong=959f3e1c066eab374fe4f3123e5d8509
you can download from above link, very small, and work nicely, install and print from there ... it give you all the scale you need.
hope all helps.

2007-03-16 04:53:38 · answer #1 · answered by alien3333 7 · 0 0

fedest.com, questions and answers