English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

so to go more in depth; it's a SONY 1995 model KP-53V25 and it's a 60inch screen, the red bulb seems to be out/gone.

my friend says she knows its the red bulb because there is this thing that you can do to allign the bulbs where you make them match up to this X and the red screen has NO X.

all the colors are off, red is black, green is a horrible brown-yellow color, and flesh tone has blue tint to it. if anyone knows HOW we would go about finding a red bulb replacement and how much that would cost please let me know. in fact any help about this situation would be much appreciated. thank you all in advance. :)

2006-11-04 08:24:38 · 5 answers · asked by atilla the honey 1 in Consumer Electronics TVs

5 answers

ok hear any actual, educated answer from somone who knows what they are talking about. first if indeed the red TUBE (yes this set has 3 small picture tubes for red, green and blue not bulbs) is weak or not firing altogether then replacement is necessary. This is extremely difficult, and time consuming. you can not do this yourself. Its not simply a matter of replacing the bad part with a new one and all is well. when you replace one of the 3 picture tubes you have to drain the coolant fluid on the face of the picture tube then set up mechanical alignment, fill the resovior with coolant fluid again then turn the set on and set up static convergence. after that you have to go into the service menu and set up eletrical or "dynamic" convergence. This is no fun even for somone who has done this many times. From what you described you could have an open filament in the red tube, this would warrant replacing the tube. if the set is only a few years old I would say its well worth getting it repaired.

2006-11-04 14:16:36 · answer #1 · answered by kc2irv 4 · 0 0

Wow. Wall of textual content from the primary man. I say for LCDs stick to Sony, Samsung, and Sharp. The high-quality decision you'll get is 1080p that's 1920 x 1080. For a forty" 1080p you desire to simply be approximately 6 ft clear of the set to get the whole outcome of 1080p. As for the cost change, a few of it a fine, and a few of it's manufacturer cognizance. In my opinion extra humans are conversant in Sony than any of the opposite manufacturers. Also they're extra pricey than the opposite 2 manufacturers. Then Samsung after which Sharp. I believe in phrases of absolute fine I believe they rank as Sony, Samsung, after which Sharp. The factor is that the change could be very minimum and makes the inexpensive Sharp TVs very attractive. Anyways, stick to the ones three manufacturers and you will not remorse your acquire.

2016-09-01 07:11:38 · answer #2 · answered by Anonymous · 0 0

go to Sony.com
and ask them 'and they also have a page where you can put in your numbers and get replacement parts directly from Sony.

every time I ask the people at Sony for help they get back to me with in a day or two and they continue to write back with answers until the problem is solved..

good luck

smile

2006-11-04 08:30:17 · answer #3 · answered by Anonymous · 1 0

it sounds like you need to hire a TV repairman to fix this small problem before you break the 60 inch TV and have to buy a new one

2006-11-04 08:26:50 · answer #4 · answered by Anonymous · 0 0

why...pitch it and go for a used newer one for a hundred bucks more than the repair.

2006-11-04 08:39:30 · answer #5 · answered by koalatcomics 7 · 0 0

fedest.com, questions and answers