I am looking to buy a horse trailer and I am not sure if I should get a gooseneck hitch..
Thanks in advance!
2006-09-10 15:53:36 · 3 answers · asked by erok2020 3 in Cars & Transportation ➔ Other - Cars & Transportation
The gooseneck hitch should be bolted to you pickup frame. The hardest part is the pickup bed it will have to be drilled through the bed and frame for the gooseneck hitch, usually about 8 bolt holes. Wiring will have to be connected for the trailer and you will need a pigtail (connector) , but it may come with the hitch. The hitches start about $ 350.00 and up.
2006-09-10 16:25:09 · answer #1 · answered by Proud Pa 2 · 1⤊ 0⤋
I'm not aware of any bumper hitch conversions. Goose neck hitches are bolted inside a pickup box just slightly ahead of the rear axle. They are usually supplied with the trailer, but sometimes the owners prefer to keep them for another trailer they may want to use. You can look for a used one or buy a new one.
2006-09-10 16:07:12 · answer #2 · answered by Canuck Guy 3 · 1⤊ 0⤋
no longer a competent thought....the gooseneck tongue is included into the physique of the trailer, basically like the bumper pull tongue. once you decrease the tongue off you isn't waiting to weld a gooseneck tongue on as good because of the fact the different grew to become into....basically sell your flatbed trailer and purchase and enclosed gooseneck. ive finished stuff like this b4 and it in no way relatively seems besides accurately..
2016-12-18 08:18:22 · answer #3 · answered by Anonymous · 0⤊ 0⤋